FANUC collaborative palletizer · Made in Quebec
Simulate.
Plug in.
Palletize.
Ready to produce in 5 minutes.
The hardest job to staff, and the first to cause injuries. Hand it to a washable FANUC cobot, ready on delivery.
- No fence, no integrator, no programming
- Operators trained and recipes ready before delivery
WHY PROBOT
Real end-of-line problems, solved.
A robot, a gripper and an app designed to work together, with no integrator and no months-long project.
01 OPERATIONS · EHS
A hard-to-staff job that causes injuries
The robot lifts boxes up to 40 kg (88 lb), 8 times a minute. Your people move on to higher-value work.
02 OPERATIONS
One machine per line gets expensive
One palletizer moves from line to line by pallet jack or forklift, as your volumes shift.
03 CONTINUOUS IMPROVEMENT
Every changeover means calling the integrator
Build the recipe yourself in the free app: 4 steps, zero lines of code.
04 MAINTENANCE
A line down in the middle of the night
The AI assistant walks the operator through clearing common stoppages: fewer night calls, and maintenance freed up for other work.
05 OPERATIONS · HR
Always someone new to train
Each employee trains on their own in the app with narrated tutorials, even before delivery.
06 MANAGEMENT
A long project that’s hard to justify
Plugged in within 5 minutes without disrupting production, and 8 years FANUC maintenance-free: payback in under 18 months.
SAFETY
Collaborative safety, built in.
Force sensing on every axis and automatic stop on contact: the palletizer works next to your people, with no fence, in a single operator’s footprint. Compliant with ISO 10218-1/2 and ISO/TS 15066.
PROBOT PALLETIZER SOFTWARE
New product? Build the recipe yourself.
Without a single line of code.
- STEP 1
Product
Dimensions, weight, label. SKU by barcode. - STEP 2
Pallet
GMA 48×40 or 48×48, EUR, CHEP or custom, with allowed overhang. - STEP 3
Pattern
The app computes possible patterns and ranks them by efficiency. - STEP 4
Slip sheets
On the pallet or between layers, with or without flaps.
Build your first pallet today.
The app is free. In Simulation mode, build your recipes and train your operators, then transfer the recipes to the robot when it arrives.
Line down? The AI tells you what to check.
Operator Assist suggests fixes for common stoppages. Included with the maintenance plan.
Your operators learn in the app.
Narrated tutorials in 10 languages, built for the night shift, no trainer needed.
Your data at your fingertips.
Stop causes and durations, rate: everything to track your OEE. Reports by email or USB key.
FROM ORDER TO PRODUCTION
Productive from delivery day, even when the team changes.
With the free app, your operators learn while the palletizer is on its way. When a new operator joins, they train in the app: the dip is small and recovery is fast.
Probot produces from delivery day, with no integration period. Elsewhere, installation and retraining widen the gap before the machine pays for itself.
BUILT FOR THE FOOD INDUSTRY
Designed to make your audits easier.
Materials and finishes chosen for sanitation and frequent washdown.
IP67 robot, easy to wash
Smooth surfaces, internal cabling and shapes that shed standing water.
Optional food-grade version
NSF H1 grease and USDA-compliant white epoxy coating.
Ecolab-certified paint
Resists cleaning chemicals and harsh environments.
Stainless steel hardware
Optional for frequent-washdown areas, or a full stainless steel base.
A smart gripper, designed by Probot. Modular, vacuum gripping, up to 40 kg (88 lb).
The standard cell, in kits
Start from the base cell and add only what your line needs. All conveyors are roller conveyors, 48 in long by 16 in wide.
With 1 conveyor
The base cell with an infeed conveyor for one line.
Starting at C$161,350
View in the store
With 2 conveyors
Two conveyors to palletize two lines or two products.
Starting at C$167,300
View in the storeSlip sheet module
Automatic slip sheet placement between layers, quoted separately.
Food option, level 1
USDA white epoxy paint, NSF H1 grease.
Food option, level 2
Full stainless steel base.
Commissioning
On-site installation and training, quoted separately.
Prices in Canadian dollars, before taxes and shipping. Options and commissioning quoted separately.
SPECIFICATIONS
FANUC-tough, operator-sized.
FANUC CRX-30iA collaborative robot- Robot
- FANUC CRX-30iA
- Max payload (88 lb)
- 40 kg
- Max rate
- 8 cycles / min
- Pallet height
- Up to 2,200 mm (86 in)
- Stations
- 2 pallets, 2 different recipes at the same time
- Pallets
- GMA 48×40 and 48×48, EPAL, EUR, CHEP or custom
- Load types
- Boxes, bags, pails
- FANUC maintenance
- 8 years maintenance-free
- Safety
- ISO 10218-1/2, ISO/TS 15066
- Ingress protection
- IP67 (robot)
- Integration
- PackML states, optional OPC UA PackTags
TURNKEY DEPLOYMENT
Automation, without the months-long project.
- 1
Consultation
Review of your needs, space and production goals.
- 2
Design
Tailored solution: gripper, pallet pattern, integration.
- 3
Installation
Plug in the palletizer and transfer your ready-made recipes: producing in 5 minutes.
- 4
Production
Operator training, performance tracking and ongoing support.
Grants for your project
In Canada, several federal and provincial programs can fund a significant share of your automation investment. We’ll help you check your eligibility.
TRUSTED BY
Choosing the right palletizer
Three questions to ask before automating your end of line.
Frequently asked questions
How much does a robotic palletizer cost?
Our standard cell comes at a fixed price, posted online. The price depends on the kit and options you choose. Commissioning is quoted separately, and grants can cover part of the investment.
Do I need an integrator to change formats?
No. You build the recipe yourself in the app, in 4 steps: product, pallet, pattern and slip sheets. No code.
Can operators be trained before delivery?
Yes. The free app has a Simulation mode: your teams train in it and prepare recipes before the palletizer arrives, with narrated tutorials in 10 languages.
What does the AI assistant do?
Operator Assist reads the cell’s status and walks the operator through clearing common stoppages: a dropped box, a robot waiting, a format change. It’s included with the maintenance plan.
Cobot or industrial robot: which one?
A cobot takes less space, is easy to reprogram and can often run without a fence. An industrial robot suits very high rates and heavy loads. We’ll help you decide based on your production.
Is the cell suitable for the food industry?
Yes. The robot is IP67 and designed to shed standing water. Two option levels are available: USDA white epoxy paint with NSF H1 grease, or a full stainless steel base.
Who is behind palettiseur.com?
Probot Systems, a FANUC integrator based in Lévis, Quebec, specializing in collaborative palletizing cells for food, beverage and manufacturing. Visit probotsystems.com
See it palletize your boxes.
A 30-minute demo, no obligation. We’ll look at your cases, your rate and your pallet plan together.